Exactly what you are trying to avoid.
As far as I know the op just said Ed wasn't moving the Accelerator not that he wasn't raising the rpm And it's not artificial ,it's natural,...
I'll try to explain it If you are cruising at say 65 mph and you come to a grade where you need to downshift , you don't try to raise the rpm by...
LOL,, Very true.
Allow the engine to idle 3 to 5 minutes before shutting it off after a full-load operation. This allows adequate cool down of pistons, cylinders,...
Do not idle for extended periods of time. Excessive idle time can cause poor engine performance. Internal combustion engines must not operate at...
Cummins ISX Idle the engine 3 to 5 minutes before operating with a ~ load. ~ After starting a cold engine. increase the engine speed (rpm) slowly...
[IMG] J.E. Culp Transport offers a variety of reefer, dry van and flatbed services, traveling to the American East, the southern states, as well...
The old quadrajets used to have a tab on the side that wouldn't let the back 2 barrels open until completely warmed up to facilitate that. The...
I don't think anybody is saying that. ''Define '' warm up and cool down, that's where the discussion comes in. an engine at idle gets 0 fuel mileage
There is NO need to idle the engine for 3 minutes By the time you get parked the cool down is complete. Modern oils will not coke up like the...
I don't think anybody is argueing the cool down after pulling a load. It's just that the cool down starts when you let off the throttle on the...
I don't think it does actually, If you just read it as facts. The automated truck it is programmed in tho .That's the only part I disagree with.
Tachograph - Wikipedia It's really hard to describe and I'm a 1 finger typer
Going up you shouldn't need to rev up the engine. unless skipping gears of course but I digress. Going down ,maybe, but easier to just skip a gear.
