Can anybody tell me where I can get a permit that allows me to enter into va from nc for about 2 months..I run a dump truck and looking into a job...
What's it worth ..I paid 150.00 had 90 in work done on top of what's there ..at the radio shop it peaks there stuff out not shop I got it from...
Guys I'm looking at buying another dump truck and have no clue on macks..I know some guys that have them but they have the ev7 ..are these engines...
Where would the air intake sensor be on a 97 cummins m11..
Thanks that's makes sense . .but that's where they program it from last time..inside the truck . .is it a hassle to take the ecm out myself ..I...
That's about what I was thinking . .you can pull information from there but can't program . .pull ecm few more hrs of labor smh
Ok took my truck to the cummins place to bump the hp and tq..they plug it up get all the information out they need..tell me it's set at 280hp...
You guys think 1 of the switches on the dryer could be the problem
I just replaced the 4.7 in my 02 ram 2700.00 with 3yr 36000 mile warranty . .took about 15hrs total to remove and replace . .
Looks like I have to switches on the dryer .. [IMG]
I check wiring from fan back didn't find anything . .
No it has 2 wire plug on top of it..
Ok I was having problems with the ac kicking off and on right at the end of the summer ..is that the same switch ..
1997 freightliner fld cummins 11 my fan is air clutch and I have a manual switch..problem I'm having is the fan now comes on and off at random...
So could a out of adjustment injector cause this
Also I want to add it's not a continuous miss it goes and comes ...more under load then normal driving
Got up to head to work truck start to miss in about 5th gear under load but goes away..I've noticed my mpg has went down about .5 from the usual...
Should be located at the back on the frame rail ..has all the brake hoses running in to it
Thanks guys I'll pick 1 up.will I lose my charge when changing it out
Ok guys I replaced the compressor on my 97 freightliner last year cummins m11 ..reason was in put a hole in the old compressor pulling on it ..so...
