That a nice looking unit Ron. Are those 2' a big problem? Does it mean more escorts
I'll add to that by if you cut 2" pipe in half and weld it over the corner the chain runs over it and is easier to tighten.
The biggest thing is we drive on the other side of the road so if you brought your truck over you would have to convert it to right hand drive. We...
backhoes have their pivot axle at the front like tractors so the more weight you lift with the front bucket the more they try to lift one back...
He said he had 11500 on the steer can't he slide fifth wheel some more and another hole on or two on the tandems
[ATTACH] Some more of the usual [ATTACH] And the short
I read a story a while back which was about this guy who was the national kick boxing champion. He was always angry and not affraid of nobody. He...
You can get shackles with a nut bolt and a split pin that are rated if you are worried about it coming undone
What diameter pvc pipe?
That's a lot of white stuff
Always roll mine up and finish by going up through the centre and creating a hitch out of it because I had a driver just roll it and stuff it...
This is interesting to watch http://youtu.be/7_2vjb2Wd5U
Yes it was lbs they were 13000kg each two would of been just a little heavy for some of the trucks. Our limit on 3 axle trailers and 3 axle trucks...
Only carted them 120 mi and had to get two loads done in the one day so it would of been great if we could of gotten two on in one load
[ATTACH] 9' pipes for a highway upgrade. Just over 28k so only one a load
I had one on a Mack do that didn't go away and they replaced the internals
Jost fifth wheels don't slant when unhitched because of the way they are bushed
Most have steerable axles usually either the very front and very back axles or both rear ones. The other thing that they have is hydraulic...
[ATTACH] Not a picture of a load as such but this is the standard heavy haulage trailer that runs over here. This one is 4 rows of 8 tyres and 2...
the main reason I dislike ratchets and trying to achive this while working them over your head. And yes I lubricant them every time I use them...