Air bags are all I see in dirt work here they do get stuck quicker than springs but seem to hold up well on rough roads if you're going over a...
Sounds like its running to cold (Thermostat's) Some smoke on a cold start not unusual unless its a perfect world
Oil fields, Construction site's, Dirt work, some times there's not a lot to line up with. And there are pipes and such sticking up easy to forget,...
The old 335 Cummings 1200 degs before the turbo we drove using the pyro, higher elevations had to back out of it a lot and drop gears no inter...
Snug them then use deg's, use a torque wrench first to get a idea how far to turn (90 or 180 or what ever) then you can watch the socket as you...
We have a push/pull SW mounted to the far right dash, the main problem is the wire shorting to another hot wire then their going to open, I...
We have a 95 N14 celect it has always sounded rough at idle the heads were replaced beacuse of water leaks water tubes between hd's. Even with...
Not perfect, hope the Nosey Neighbors aren't watching me all the time. He has a point if the facts are right. And he can sure type better then me.
I got one in Texas it was 2 points this was in my personal veh. They said it was a moving violation.
Doesn't sound like hi Hd pressure to me wouldn't take 2 hrs, and you have the fan turned anyway. Do you have the air in the front working also...
What they did should not have done any harm.
What they said about the oil is correct, Is you're eng fan working normally is the air getting to it for it to come on, without it the Ac is...
The new compressor would have come with oil in it already, you said both expansion valves replaced wouldn't think there would be a orfice tube....
I drove what we called a body load pup with a 15 ft tongue, a low reverse helps I watched the front wheels of the pup kind of like pushing a wagon...
Need to be able to do both steep grade at a slow speed, its best not to miss a gear use the clutch
If they started giving tickets for speed on off ramps we would all be in trouble, and some county roads.
Usually there's a tag on the frame saying not to weld, I worked for a company that found a cracked frame they tried a channel inside it broke then...
If it lost its prime, what I've seen the guy I work for is to keep puffing either to keep it running and the pedal on the floor and keeping there...
I've seen diesel generators gulp oil if they run with a light load, one I wouldn't have believed, we were told to put it on a load bank for 12...
Compressors aren't made to pump liquid their positive displacement, very good chance of breaking valves or worse.
