Try Ziegler Cat in Altoona. They do alignments and are probably able to get you in since they run 2 shifts daily.
Typically, wheel hp is around 80% of the rated hp so, If you used 395 as peak hp, 80% would be around 316 wheel hp. Double check Altorfer's...
That serial number was built as a 380 HP @2100 rpm. It actually develops 395 HP # 1800 Rpm. See the spec sheet attched.
It almost sounds like your VVA noise could be caused by a broken stud that retains the VVA to the valve train. Only way to tell for sure would be...
That could well be, if Nebraska Machinery did the check valve update just 3-18-10, then it will take a few days to post on the engine history.
Looking at your engine service history, it shows you have ESC coverage on the DPF (and the Cat Regeneration System) to 500,000 miles. I assume...
This serial number was built in oct. 2005
Check with these folks. If anybody has one , they should. http://www.midwestdiesel.com/
Uprating C13 (KCB engine prefix) requires changing injectors, the high pressure turbo, and software. Plus Cat charges an uprate fee of $500 if...
It's basically a software change to the rating family but you need enough transmission torque rating in order to get the dealer to make the rating...
It's a secure factory site so I just attached it for you here.:biggrin_25525:
The facts are that Cat and Donaldson are 50/50 owners in a joint venture company called AFSI ( Advanced Filtration Sales Inc in Illinois) which is...
attached are Cat Information release memos covering oil and fuel filters. Basically, as one previous poster stated, the "specs are what make the...
BSX10781 was put into service in March 2004. The BXS serial number prefix was the 1st of the Acert motors. Later vintage units used MXS and NXS...
Here is the Service History on this engine. ECM download and Oil and coolant samples may help you access this engine better.
Here is a picture:
"Now, for the Maxxforce 13. Essentially If I'm not mistaken its the old C13 block with tooling from Caterpillar and some components from MAN of...
Here's a link https://ohe.cat.com/overhaulkits
Take a look at the demo on the " Mitchell1 software" website. http://www.m1products.net/
Morepwr, What exactly are you trying to communicate with? a 2007 truck engine? If so, the com3 should do the job. If it's earlier than a 2007...
