As a mechanic for a long time, I have had a chance to talk to a Monroe field rep. He told me the main reason for shock absorbers was to absorb the...
Next thing they will have driverless trucks, just dopes riding along, the you can say the earth used to have truck drivers !!!!!!!!!!!!!!!!!!!!!!!!!
There you go !!! Is the a spring ride block or air ride lol. I started off in a B 61 then a 64 Road Boss with a rompin stompim 250 super cummins.
Yes clamp it off no bandaid will work on the outside of 120 lbs, sheesh that like putting a bandaid on the outside of a tire. Mighty well put...
Get some enzyme gas treatment to add to your gas can. It takes like an ounce to 5 gallons. Small non injected engines don't run good with ethonal...
do not try to easyout it hot. once you drill it out that kind of relieves pressure . Take a plat punch and whack it hard a few times to shock it...
retracted
The only way to go less than 200.00 is to get someone to show up to heat it. Or you can buy one at harbor freight 319.00 and get a 20% off coupon...
I got the fix for this also
I don"t want to sound pushy but I have done this work for thirty plus years before I started driving again and this is worked 95% of the time....
[MEDIA] just don"t pull the trigger while heating or you cut the end of your stud off.
Portable Torch Kit with Oxygen and Acetylene Tanks you would have to get the tanks fill at a local welding supply store and youtube how to work...
If you do drill it file the end flat and center punch it for a starter, drill low speed, lots of oil for cooling. Do not break the bit off as you...
Not enough heat from propane , if you know someone with portable tanks that can come over, it would be better. You can use Mapp gas with your...
Are you heating it with oxygen and acetylene
What kind of torch are you using.If you are using oxygen and acetylene .heat that stud up cherry red then walk away for lunch and a soft drink,...
A mechanical engine will smoke on cold startup as the mechanical timing has curve limits unlike electronic timing that has a wider range of timing...
Tapered reamer well worth it to cut holes in a frame, drill a 3/8 pilot , some cutting lube , cuts hardened frame rail like butter. Mounted many...
[IMG]
