After i did a full delete and bw turbo my in dash computer says 2250 and then some i haul logs as well have a self load tri-axle i get 5.4 mpg now...
Kitmasters makes some good rebuild kits ! They also have a two year warranty i rebuilt mine w horton parts and 11 months later it went bad again...
You may want to take air line off at fan and see if you are getting 120 psi there depends on what kinda line it is a rubber one can go bad and...
Nut that holds impeller tight on pump shaft may be loose pull off back cover and plate check for a loose impeller i ran into this with my last...
I had a cel when cranking engine and no start tried again cel came on then engine started got the flash codes and said crank sensor out of wack so...
I average bout 350 to 400 hrs between changes my hauls average bout 80 miles one way then i always have some 3 to 20 mile hauls between them so...
I grease an service my truck every week and change my own oil also i dont service the spinner every oil change bout every 3 changes and i change...
I have had it only 10months but what i have learned i wished i would have got one from when truck was new all it costs is some time kinda a dirty...
What you need to do is find a shop that is a non dealer i been through this i know the cylinder packs are bout $550 A hole and bearings are around...
I ment a oil bypass filter i have a spinner ii on mine soot used to be 3.7 and is .7 now in my oil samples .
Oh ok that's good if you don't have a bypass filter it is a good investment for cleaning it up on the inside !
I didn't read that rite i see he is in Canada ! I sorry bout that !
Im not in Canada Im in Pennsylvania and yes you can build a glider with a older emission engine for how long that's to be seen!
Not sure on dd16 but i have heard some horrer stories on the dd15 if it was me id do a glider w a ddec4 or a ddec5 with a egr turbo delete ,...
What kind of reprgramming have you done ? I have done a full delete on mine and finally getting milage that is good for what i do . I have tried...
One thing that i have overlooked is the bat cables at the ends shrink wrap over the crimp cut it off they can be all kind of awful under there and...
Lipe! With that engine and your plans a stock eaton wont do discs and springs in the discs wont take the torque for long!
I wonder what the rocker bushings and shafts looked like mine were shot ! Just a thought.
Oh forgot to say mine had 410,000 when it started to drink oil but for what i do that be roughly 700,000 road miles.
If you want it to last you need to delete the egr ! To much soot in the oil on this engine acts as a fine grinding compound will wear out the...
