2001 Detroit 12.7L turned up to about 550hp. I am just looking for the core, I can reuse my top and bottom tanks. Yes I submitted the vin,...
My KW T800 radiator has rotted quite a bit, leaking and I would like to replace. I've found the most reasonable place with decent prices and...
Start simple... o-rings on fuel filter housing, cap, replace after every use.. I tried leaving the old one in there once thinking well i only...
That manifold swoops down... you can access all the bolt easy... The one I need is straight out.... where i think the left and right side are the...
Ya it is the last resort. Searched everywhere for one.. no luck. It does not look fun. In a previous life i did high pressure natl gas...
Was gone a week, back looking at it. Here is the smooth running side manifold... probably why it sounds so smooth as most the exhaust wasnt...
Cam looks fine, there is even lift on all rocker arms. When i checked the lash and injector height i watched them all and are the same....
[ATTACH] [ATTACH]
Was told by previous owner it was 8v92 but it has 71 on the breather on valve cover, water pump ID from somewhere I read looks like 71, and it...
Yes, someone must have pried on it with something. The opposite end of the clevis pin. The bracket taken off you could see where it bolted to...
I am thinking the same, I only took that one side apart. Going to do the other side also. But we are thinking the muffler is making it sound...
I went over and looked at it again today (its my dads). Rechecked valve lash, all good. started up almost instantly. I got thinking.. 1....
Yes everything seems to be in spec... lash is good. I find it odd no smoke from unburned fuel.... Is there any special bleed procedure for...
If that cylinder was getting fuel and not burning it wouldnt there be puffs of blue smoke out the exhaust? The video started out right at start...
Trying to figure out what this misfire is.. Finding info on this is pretty tough... not one shop in a huge city has a clue when asked....
I ended up putting one in... the bellhousing is aluminum and it is not very thick, 1/8" and maybe a bit more in a few spots but seems to be...
I purchased my truck, had brother drive it home because i didnt have CDL. Went to DMV took written test and got temps... drove around town for...
Thats good to know... thanks.
Got a 2001 Kenworth T800. 13 speed.. I am currently just taking it apart to do the clutch and noticed there is no rear mount. There are a...
Yep still doing fine as of today... the slightest adjustment of it was all it was.
