Yeah I know I see the sign every once in a while ..... But couldn’t figure it out ... everthing is 102 wide now a days
Anyone know if New Jersey is still pushing the issue of being on side roads with a 102 inch trailer??????
Just read this thread today,and im going to tell you that the Peterbilt 379,389 are some of the easiest and the best trucks to get it right ,and...
Thanks for the reply You are correct about the X and the R and I get those numbers, at the time I didn't understand the phaseout starting to get...
So I have been playing with my new aa55 to tune some antennas I can get most of them pretty good (resonant on any given freq) I have one question...
Craig don’t you have a aa55 If so you don’t need the math, your analyzer will tell you exactly what length your coax needs to be for 1/2 and 1/4...
I think I have the same formula Interested to see what you have
Don’t have much of a problem with routing the coax I have 15 trucks that I’ve been routing for years now, and always run the same route as stock...
Is that what you are using… And is it easy to string through the truck
Going to check that hinge out But not so sure it’s not the coax I’m using Did 3 installs this weekend 1-using a hustler magnum HQ-27 antenna...
Oh and didn’t throw the old factory antenna away Threw the old Wilson away The factory fiberglass ant tunes right in on Chanel 19...
NO not running a ground wire from the bracket !!!! Haven’t run any ground wires and if and when I do it will be braided straps (cab to frame...
This is what you would think, but I have already tried to shorten the whip way beyond what you would think and also started with a new one, all...
That’s what I was thinking myself ... Had and old Wilson that’s was tuned right down to a 1.03 with out a problem, been pulling my hair out to...
Yeah I’ve tried several different lengths, with several different whips Nothing is working Like I said in the first post, the stock cheap...
Best I can do is try to get the X as close to 0 and R as close to 50 with an swr around 1.4 My resonant freq is way down in the 26 area and the...
All this on 27.115 freq with the SWRs around 1.38
Glad you mentioned that, the resonance freq is way down at 26.319,what I was working on was the ohms and impedance which are...
Yeah funny thing I hooked up the cheapy stock antenna that came with the truck ( 4 foot fiberglass) and had a 1.03 on 19, but the SWRs climbed...
So here's my problem had an old trucker 2000 on the truck and had an SWR of 1.03 no problem, stripped one of the set screws out of the mast and...
