I checked out the prices online...looks like $500...and it'll get trashed with grease from the company trailer swapping
I bought a truck that has a silicone? plate on the 5th wheel. It's in rough shape and has been greased. I want to remove it and leave it off...
I've got a 2016 Pete 389 Today we were running through lots of slush/rain on the highway. The traction control kept activating and slowing the...
It's got about 250k miles since the rebuild was done. Its been doing this for about the last 75k miles. I did a second synthetic after the first...
Yeah...I just assumed it was sludge cleaned out from the synthetic. But I wish I would have cut it open just to see. I did have it happen again a...
It didn't really use oil until I decided to move to synthetic before winter. Then it started using oil and plugged my filter. So I switched back...
I might try running her for a bit longer. Still runs alright. Power is ok...fuel mileage could be a bit better but not terrible. Sounds good,...
Yeah...it's like that pretty much all the time. After oil change all the way to the next one
That's why I was wondering if a drop in would be a better choice. Regular inframe around here with new head/injectors is prob 33g. If it gets...
I forgot to mention in my post that my oil pressure is still good. Idles hot at about 22psi and running down highway at 35-40
About a gallon every 1500-2000miles
I got a question for those who may have run into this or have more knowledge than me. I have a 2016 389 with an isx 2350. When I bought the...
Lol yeah it definitely pressure tested itself. Fingers crossed that the rad was the weakest point and saved from further damage.
One of the plastic ones. I found a replacement rad from Star Cooling in Edmonton that are made in Canada for 1200 CAD. Metal rad instead of plastic
I think I had a really small leak in the rad before this happened. Every once in awhile I'd pull away from a stop sign or on a weigh scale and...
So far it's good. We pressured up to about 8-10 pounds and it was leaking. Just hoping the head gasket is good but with the rad leaking it's...
We put a pressure tester on the coolant tank this afternoon and the rad is cracked somewhere at the top. Can't see where exactly unless we pull...
It only seems to lose coolant until it gets to about 2 inches from the bottom of the tank. Then it seems to stay there. Oil looks good, nothing...
Thanks. It'd be nice if it was cheap. Truck still runs good. Got back to my shop and I can't tell what's going on. Almost seems like I might...
ISX15 2350 (2016) Deleted (cooler and vgt still intact) So I blew a fan belt as I was coming down a steep hill with 150k pounds. Didn't know I...
