Kevin Rutherford will tell you any thing in my opinion, As long as he can make a buck off it Take anything this man says cut it in half and...
Ya, I need to hear that also
I keep mine under 1500 usually 14-15 hundred rpm Cummins will tell you any time your over 1500 you start sucking a lot of fuel..
You are right not all engines have them I think it catches your crankcase vent....
If running red antifreeze I change my Coolant Filter 3 time a year Replace only,Right side of motor below Egr.( but if you don't know what they...
HOS are set up for night driving, Say What.........
Depends on how bad the company is you drive for is, Remember they're all bad. Odds are they won't let you leave when you want cause they cut it...
I used chevron, I don't care for it there so called synthetic is worse a low grade group 3 oil at best for a regular oil I use rotella t3 or even...
I didn't assume anything,I read it for myself, you printed it. And if you tweak a Cat or Cummins as you call it you would still only see there...
No leaks, mine leaked at the back of the head from the cam covers.
If they did it in 2.5 and a polish your bill would still say 4 hours I bet.....
I don't get it 47,000 lbs is barely a load,this trucker mentality is rediculous, because you pass some one on the road you win the race did the...
Weather they need it or not, I Bet
How please explain, I need to hear how..........
An 18 speed to haul 46,000 I think not, what a waste of money and extra weight.............
He said his engine is a n-14 they have one bearing that needs to be changed if not you will take out the crank. This is from experience and...
We will never know, I'm just saying that if you watch him hit the rail his momentum changes, plus with the slope he was hopped, but with no rail...
I would start with a dyno,and find someone that knows n-14's, Call around to find a good mechanic, they are a good motor, you must keep good...
The guard rail was the culprit here,by bouncing of to the left it caused the truck to start to jack-knife then roll over. no guard rail no...
This is the wrong place to ask that question, But any way your thinking is pretty close but talk to a shop that changes them regularly and ask...
