I'll post in here in a few when I get out to the mobile and I'll try and get ya on 17.
Yeah, it's been real quiet all morning. I may go out in a bit and check again. What do you go by? I'll try shouting you out on 17....
SWR will always be important for your equipment to function as intended, however to radiate your signal effectively you need to get your antenna...
It was quiet here in the Keystone a few minutes ago.
There's a good chance you don't actually have a 1.5:1 swr if you are only using the built in swr function. Your best bet is to check it with an...
Yep, back in the day drives used to mount them on the edges of the front bumper.
But why spend the extra 3-400 dollars to achieve the same output as the six pill? You'd still be loafing a six pill with a 655/955 as a driver.
4 or 6 would be about it, a 655 doesn't have any where near enough drive for an 8 pill.
It has little to do with the radio as long as it acts as it should. To preform optimally you will need to mount an antenna with a good ground and...
Best bet for a cheap base antenna is to use a 102" whip and mount it to something as high as you can get. Then use (2) 102" lengths of copper...
Im working in borrowing one. But both of my swr meters are accurate according to my mobile setup which uses a bird dual line section to measure...
I guess youve never seen a 102" whip going down the road lmao.
That's what I was thinking but I wasn't sure if one of the drivers going bad could give me the the high swr and variable power issue. I think the...
After reading my post again, it seems pretty clear to me what I was saying. And yes I used an external swr meter, it reads exactly the same as my...
I've always heard good things about them, and since my last Wilson 2000 broke I decided to stay away from them now that it's Barjan. And I wasn't...
Ok guys so as I've said in some of the other threads I have a 4 year old Stryker 655 that I've only used for about six months total. On Friday...
If you're going to drill a hole in your roof you might as well use a puck mount and ditch the mag mount.
I just put a browning BR-78 on my pete after having a nightmare of a time with my MM-9. I didn't even have to do anything but put it on the stud...
It's about 4 years old so warranty is up.
Once you get the receive aligned and the noise floor lowered you will be able to hear out into the distance no problem.
