Ray bought silver eagle from Terry (everybody's electronics in Southaven Ms) and changed the name to comet but the design was the same. He left...
Channel 5 is the other shop down on the Service Rd facing I55, Ray is in the brokerage building beside the petro gaurdshack.
And Ray picks up radios almost daily from swamp dog, aka. Caboose boy, at exit 42 that he can't fix! Ray has been my tech for almost 20 years,...
13.8-14.2vdc is normal operating voltage, regardless of lights/load on system. Does the engine just spin over but won't start like it is not...
Yes, turning a twin turbo C15 into a single turbo c15 will void the platinum warranty. And good luck getting any reputable cat shop to work on it,...
If oil has fuel in it, then you have an injector or injector cup problem putting fuel in the oil.
cascade powder does not work, they took the little blue crystals out and it doesn't work worth a crap anymore. simple green liquid works wonders...
stuck/worn rings or burnt liners. and with the injector problems could have washed a liner or 2 out with fuel. sounds like it needs an inframe, or...
rays cb shop, next to the petro in west Memphis ar, 870-394-4046. only guy that has touched my stuff in the last 10-15 years. ray has been in the...
could be liner height bad, head gasket blown, cavitation in block or liners. if its never been inframed I would bet on liner height bad or...
60 series=less maintenance cost, dd15=more maintenance cost, especially with no warranty. oil changes cost more on dd engine, 3 or 4 fuel filters...
if that's what you are using it for, and you like the look, function of it, then go for it.
hey mike, yes the skipshooter antennas are being made in IL by Charles electronics, same company that makes maco antennas. I have 1 of the last...
yep the integrated antenna in the roof is junk for anything over 4 watts. put a mirror mount, coax, antenna and set swrs and put your general lee...
to me, no. for you, maybe if you are going to leave it stock, or have a good tech that knows what he's doing. catch the old standby cobra 29/25 on...
and your gage maybe be a few degrees higher than what the ecm is reading but sounds like it is spec. your water pump is not computer controlled it...
rings and liners, sounds like time for an inframe since you don't really know the history of the engine and make sure the ecm is programmed to the...
if the ac compressor clutch is staying engaged/locked in, make sure the key is off and see if you can spin the outer part of the clutch, you...
was the bottle test done at idle or high idle? that isn't that bad, yes a head gasket will leak oil but never bubble in the bottle, run bad or...
^ what he said, if no leak, clean the puncture area, put some tire glue or bead sealing compound in the hole, let it dry to seal the area to...
