Update thank you for the replies. The truck is done and running fine with no leaks.
I heard about "a hidden" gear on 8ll and it is the same hole used. I tried it out of curiosity it is a ratio between the highest low range gear...
I am going to finnish replacing high pressure fuel lines on a mercedees MBE4000 tomorrow and will be setting the valves while the covers are off....
Thank you very much Animosus. I am a mechanic for my local municipality and replacing the high pressure lines with the update so covers are off...
I am just wondering what the valve set procedure is and what the lash is on a 2008 mercedees mbe 4000 engine. I am very familiar with the Detroit...
I have seen one of these on my old bosses mack highway tractor. He removed it as he was going through a lot of oil. It was working fine always...
I would imagine her learning will be short lived after she bankrupts herself with fines and violations. On the other hand hope no one gets hurt...
I agree with sneaker the 45 and up coils suck. But they did bounce me home a few times so it was better then hanging out in truck stop waiting for...
This was almost ten years ago but I would have been right on the legal limit. Then I fueled up and put me over. The officer was good to me so I...
I didn't see this mentioned but something to keep in mind as it is easy to over look it. Remember that fuel has a whieght. I scaled in Porter IN...
The valve is also called a tractor protection valve. It will be located along the frame somewhere it depends on make. Not sure were kw puts them....
First off class "a" is your tractor trailer class "b" is a bobtail tracter or dumptruck, straight truck, class "c" is bus. You will need a class A...
It also depends on if the sensor is on steer or drive. If its on the steer it possibly can be changed with out removing tire or brake drum. If its...
Here is what I did on our three axle float when we got it to eliminate alot of wiring. I am using a 4" torsion mount amber strobe. I cut a round...
Hey Tim you could also try calling Trafalgar Supply Company (TSC) out of Woodstock, Ontario. They are a smaller family owned company but very good...
First to answer your first comment no in Ontario for the road test you have to supply your own equipment. I am not going to dissagree with your...
It could be an automatic fail were you are but I'm in Ontario, Canada and I floated on my road test and passed. I did not do a driving school just...
The only experiance I have had with TA was'nt good so they did not get another chance. I am a certified truck and auto tech and decided to go...
I believe Aleeex was wondering how the lobe is worn. Example is it pitted, is it ground down from a rocker roller siezing and wearing the lobe...
I would not put half a bottle in when it comes to methyl hydrate alittle goes along way mayby 1/2 to 1 cup initially. After that I would go 1/4...
