I would still have someone double check the parameter settings on the ecm. I've gone through and had a few that had parameters changed by someone...
Just don't slack off on doing your parked regens if you do a lot of stop and go driving where the truck will not perform the auto regen while...
On newer 4000 series internationals you can just unplug the sensor to turn the light off. The sensor closes the circuit when it senses the coolant...
Basically so a someone doesn't send their truck through a wall. Same reason they say not to do a regen on top of a leaf pile or in a grassy...
The computer has to see that the clutch pedal is disengaged. Same reason for the brake valves being pushed in then released. Otherwise it will not...
What were the exact codes it gave? Many of the sensors have different codes for different types of faults. Doesn't always mean the sensor itself...
At least it was a two piece mirror. Lol
Glad it's working for you now. Sorry, it took a awhile to respond but I haven't been on in awhile. Harvest season has started so we have extended...
Likely a abs wheel speed sensor or wiring short. The tc with the circle is your traction control indicator. Your traction control uses your abs...
Just checking. I was working on one with the same issue with the fuel gauge that goes past full with the low fuel light on, but it's in for a ac...
He doesn't by chance drive a blue international prostar in Illinois does he?
Does the dome light stay on even with the brakes set??? You check the resistance in the door jamb switch while pushing it in and out that will...
By far the best software I have used so far is Cummins Insite. Easiest thing to use and no wasting time finding specs or diagrams because click...
By looking at the wiring diagram for the tanks I would take the extra step and test both sensors. I'm still looking for the gauge diagram. fuel...
Unless you have a computer and the software to make it do a gauge sweep...its pretty much just process of elimination to figure whats causing it.
Have you tried removing the sending unit and manually moving the float to see what the gauge does yet? And what are the voltage readings at the...
It sounds like it might be a power issue. I would try what Keith said and start and the batteries and work your way towards the ecm cleaning up...
Hubs getting over heated can also warp aluminum wheels if they get hot enough. It tends to warp the lip away that's opposite the face and push the...
That makes sense. It's just something that I've always been curious about because majority of our customers are in the agriculture side of the...
Have any of you ever compared cost for a comparble glider setup compared to getting a used or new truck? We do glider builds at our shop and have...
