Typically as above, gauge and jumper.
Yeah now I see, no water valve, just doors. Bloddy T2's always something different. Send me your e-mail ive got a wiring diagram for you, if you...
if you send me you e-mail address i can send you a picture of what i am describing, i wonder if you are speaking of an actuator controlling a door...
There is a valve and actuator assembly that controls the flow of warm water through the bunk heater core. The actuator simply opens and closes...
give me your ser number, let me see what this truck had from the factory.
My mom taught me how not to pee all over my hands, dont know bout the rest of you. :biggrin_25522:
Yup thermal reset.
The whole ABS system works by releasing air to a 'braked' wheel ergo if the brakes are not applied this problem cannot be caused by the ABS...
In this case something probably got twisted or pinch during the build, drop by a dealer.
Buy the valve w/ the actuator(likely an MA1680, not 100% without ser #) its not that much money, it will leak if you dont, guaranteed. Also make...
The speed problem sounds like a switch issue, like a fan motor, when the resistor goes all that works is high speed. Far as I know there is no...
Switch mounted in the A/C line from the compressor to the condensor. But sounds more like the dash switch has failed.
The engine manuals are only available from Cummins, I shudder to think what they want for them. And no on-line diagrams for pre-88 chassis, sorry....
H3 bulb is the one you want!
you can still get these, shoot me your ser number.
T2 has ya beat Gears, not by much its about $800 up here, they changed the wiper mounting and now the replacement requires an adapter plate as...
No worries, just thought you may have not noticed the fact you were in a KW section! No harm intended!!:biggrin_25525:
Atro stuff is great! We almost dont sell the OEM motor mounts anymore. The Atro ones are so much better and about half the cost, also ask about...
You may want to try the F/L section.
Unless you can get at the spring, you probably cant adjust the tension. PM me your ser# if I have one on the shelf i can get a better idea of what...
