There was a thread about injector wires being cut under the valve cover. I had a tech read my codes but his software could not read any data on...
Any updates? What about a fuel pressure regulator? I don't know, just guessing. I have been troubleshooting a low power problem for a long time.
Any update on your problem?
So that would be to keep it from building to much pressure and could not be my problem?
Heavyd, Do you know if the flow rate is regulated? Maybe the system is pulling to hard and causing cavitation? If that is any possible.
That filter is a new 30 micron. The secondary filter is a new 10 micron. I have tried several different filters and housings and always get the...
Is this air in the fuel line normal? I cannot get it to go away. The tube on the left shows a steady stream of air just before it enters the fuel...
I bought a different unit from the salvage yard but it lets air in to. Not quite as bad as my original but still to much air. I have used sealant...
I tried a different filter housing. Another Davco 382 and it did the same thing. What about when I removed the filter and the air was gone until...
Help please, I am missing something here. I have a clear line running from the output of the filter housing to the fuel primer and another clear...
Have you found the problem yet. I have a 2012 Maxforce 13 with the same symptoms. Low power, Hesitation on throttle up and white smoke. I found...
It's the Davco 382 and my problem is the housing. I used some clear tubing from one of the fuel tanks to the fuel primer and there were no bubbles...
It was not a fuel line. I put together a a clear hose and I have eliminated the incoming and return lines on the filter housing. I cannot see any...
Quick update... It looks like its coming from one of the hoses that go from the passenger side fuel tank to the bottom of the fuel filter. I will...
I have replaced all of the o-rings, the big o-ring and the threaded ring on the fuel filter. I have tightened the boss threaded fittings on the...
Thank You! I will report back later.
I have a problem with my 2012 Max 13. I can see aeration in the fuel primer bowl. It seems to happen every few seconds (cycling), while idling. I...
