I’m being told to put a 13’ piece of strat-o-flex line in place of regular brake line. Im having an issue with this as it will not have the same...
At least the cab side of it is really clean!
Yeah, pulled that out, and while it has a good amount of dust in it, it wasn’t slowing the air flow down...AT ALL! And the evaporator is really...
‘14 Mack CXU613 day cab, A/C is freezing up on the low side from the compressor to the evaporator. Blowing EXTREMELY cold air (single digits)...
Won’t be till Monday, but yeah. I’ve been thinking, they may have used them so they could pack the rear bearings without the diff oil interfering♂️
Sorry, should have specified, the drive axle. It has some type of outer axle seal the looks like it will keep the oil from getting to the...
Anybody familiar with this truck? My main question is do I have to install the oil deflector(?) on the axle ends? If they are in place, how does...
Bench tested the starter, no problems. It never hesitated on the bench, no matter how many times I did it. The bus will always start, it's just...
The only thing holding me back from changing the starter is that when I use my (Snap-On) starter button, it doesn't hesitate. It turns right over....
I've a 2012 IC Corp. (International) school bus with intermittent starting issues. When turning the ignition key, at times the bus will either...
yeah, all the wiring from the harness plug out checks out fine, not sure how or even if there is a way to check the APAds module?!
Hey wtokhi, I checked the solenoid with my Power Probe and it works fine. I'm curious if the APAds module is bad. My a/c clutch engages as soon as...
Looking for help on '99 volvo a/c. The fan is not coming on and the a/c clutch is staying engaged, even when I have it on heat (not defrost). I...
Hey everyone, working on a '02 Pete 379, fan clutch wont engage until key is off. Thought we had it solved with the clutch solenoid, but no. I...
The first leak i found was the high pressure switch leaking through one of the pins. So it was changed with everything else. Did not change the...
low side is so high it's in ReTaRd.
Got a 2000 Sterling in the shop, a/c had leaked out, pressurized system and found two leaks. Fixed both, found some metal in the orifice tube so...
