You want to look professional , flip flops- NO, pj's- NO, as far as boots something comfortable with some grip tread ,your feet and rump will...
I don't trust the gps completely , jerk out the trusty atlas to verify the route, and I google map satellite ( fine tuning route on the I-pad) and...
Some 5th wheels have a lower profile rocker stands than others, most 5th wheels are 48" ground to top of plate. When you dump the air bags it...
Correct placement of signage is crucial to any enfraction of that nature. A- sign was placed at entrance or shortly before in plain site....
Truck registration is where the office is, some carriers have offices in different states in order to save on lns and fees. If you are inc or llc...
If you was heavy on steer and lite on drives, is a issue of 5 th wheel being to far forward , tn has a king pin length law of 41' , meaning that...
I hauled lots of over dimensional loads in ky , last info on legal wire height is 21' primary and 17' on secondary roads. Any thing lower than...
As I under stand it, If you truck is used for business and is over 10,000 u you need a us dot number, driver needs med card but not Cdl ( 26,001...
Use the slack adjustment and give yourself just a little , if the truck does not have it, go to lowes or similar store. Look in the section where...
Glad that it went well for you, I'm surprised that there was only one nut. All the ones ihave ever see on heavy trucks and trailers had two nuts...
You can get the wt to haul a descent load by using a Ohio spread trailer, 12steer,20 drive,20/20 trailer = 72,000lbs and you can get old plate wt...
Most oils are to a certain spec.,some oils have different additives than others, I like chevron 15/40 year round and I DON'T switch brands,piston...
Nothing more beautiful than the older pete's that are respected and loved by their owners! Made trip to Augusta ,ga about three week back, seen...
Your driveline is turning lot more than the wheels and ofcorse the u-joints move because of the misalignment ,if they where In line they would...
Mistakes happen, it's only because your human, only difference in the fuel is the die. No extra suffer ,back when it was a big deal they pulled a...
Put bearings in dry,small coat of lube on seal contact area of axle housing, tighten wheel nuts up snug,wheel should have some drag,use only the...
