Yes that is the one. Thanks again IM
Thanks Ironmyke. I’ll shoot those numbers over to the part guys this morning and see if they work
Hello again friends. Can anybody help me with a part number? Previously I tried to repair my steering box input shaft seal, but since it’s still...
Oh well I guess I’ll just have to put the new rails, 48” bunk, airide front end and a complete paint job on hold for now
Hey Goody. I know you mentioned about setting the poppets. Does the reman have the poppets set or do I have to do that. I don’t remember doing it...
Thanks for the comeback everyone. I replaced it about 8 years ago. It’s sounds as though that is probably the life span of a steering box. Is...
I tried 0000 steel wool and Wab #2 and it came out pretty good. Tried it on my dump trailer in the back on a small spot. Some guys say the left...
I might be a little late on this subject but I had the same problem. From the transmission harness it connects to another harness to the ecm. Mine...
Hi friends. I have a 2003 Pete 379 with a TRW TAS 65 steering box. The input shaft is leaking. I changed the seal but it’s still leaking. I...
Hi Small Package. I don’t have an analogical clock unfortunately. But everything works as it should, my radio and teltek clocks are in sync and...
Also I find my negative studs to be loose. Well not loose but I was able to turn them a quarter of a turn on a couple of occasions where as the...
I recently found my problem with both rears. I was tracing my wires when I first got the tractor about 14 years ago with one of those sharp...
That’s a good idea SP, I’ll try that. I didn’t have to change my starter because it’s doing the same thing As my old one. But it didn’t hurt to...
Gotcha.its a 2003. This new stuff is bery confusing
Hey Lester. I have an MT39 with the relay on it. Which of those wires ( 3 of them ) should I jump to the big stud on the solenoid
Thanks everyone for the comeback. I have 986000 on her. It has the original cables and when I cleaned everything in the battery compartment I...
Hi friends. Well he we go again, my truck won’t start. In my previous post I said that I don’t get anything when I turn the key. Nothing, zip,...
I think I found the problem. Lack of maintenance on my part. I removed all the cables from the batteries and on the advice of my Peterbilt service...
Thanks 062. I will give that a look. It’s getting to be every morning now. I try to start it then have to wait about an hour and then she starts....
Yes I agree, but I bought it and I know they’ll give me a hard time returning it. I told the service manager I was able to able the truck without...
