It depends on the truck you got mine are: A0001420289 original Baldwin PE5272 You can call a dealer with your vin number and ask them the part...
[ATTACH] I have had this problems and was able to fix them so for future guide I decided to write in "English", what you are facing and solutions....
The other pieces where fine no crystalized def in the joints. So I said well if everything else is ok, maybe the filter needs to be replaced. I...
Got home with time to check the issue. Was the def pump filter, it needed to be change also it didn't reach Detroit mantainance schedule of...
That's how is going since spring show up! I have done plenty of 600-1200 miles for anywhere between 1500-4000! Buy your OWN truck, not a lease a...
I've got 2 trucks with Cummings engine with similar problems. One the filter needed to be replaced, the other one the injectors where bad.
Something wire is happening to the stupid Def. It's a cascadia dd15 2013, def with a one box. Recently the dozer heater died and I replaced the...
I did some repairs on my truck, fixed 2 fault codes and other staff. My question is simple when I turn the ignition on the amber solid light comes...
It might or might not had been replaced before the sale. Many company drivers over use the brakes and don't know how to downshift and use the...
Ok. Well for 2 shocks plus 80 on cables, so no more than 250 on parts plus all the fees etc that they charge, it was 300 or so on labor. Still...
[ATTACH] Safely made it home. With some time I did un assemble the plastic and bad news no lose cable or pinched etc. The meter unit is bad, it...
[ATTACH] Not anchor pins, push rod pins. Here they call it Cleve's pins. They might be 1/2 way wear, but if you change the drums always change...
Just for the wire fix or with the 2 shocks? If it was just the wires was a 15 min work about $2000 am hour. Shocks vary in price, mine cost me...
If you put new drums and pads change the pins on the push rod. They deform and brake. You don't wanna spend 200-400 and be out of brakes for a $2 pin!
They look kinda thin, they might be Dot ok, but since you already got the whole thing taken apart I would change them and be done with it.
Got the code cleared, but as the wire is halfway cut it might come back, if it grounds. I put dome wire tape around but that might/night not help...
What did they said the problem was? Might not been the same.
Disconnect batteries and check for continuity. They might look fine but the might be one cut.
What's the spn code?
You probably got a wire doing ground. Check the wire that goes to your pigtail pin 7. It's normally blue.
