Ok good I have order VCADS with PTT. Will I be able to do a forced regen or at least reset the soot level? Also does the EGR delta p sense soot...
Hi I have had soot level problems via a bad sensor. The STOP light on the dash came on. But I was able to drive for several hundred miles...
Hi Guys, I'm trying to identify a piece of exhaust that comes from the DPF filter housing and connects into a straight pipe that sits on top of...
Hi does the head of a d13 need to be removed to do the injector cups on a 2008 model? One mechanic said it does another one said no?
Thanks for that info, sounds pretty smart. Is this the kind of thing that maybe isn't surprising with a take-off bolt-back-on situation? No...
It wasn't leaking from there before, and the engine hasn't been run since it was removed and replaced - what's the purpose of that hole?
We replaced the gasket inside the water pump housing and replaced the gasket on the water pump itself, poured a few gallons in the engine and saw...
Hi Ben. I did manage to disconnect the fan and removed all of the dampener bolts. But I was never able to remove the dampner / harmonic balancer....
Hi guys I need your help. I have to remove my harmonic balancer. Its probably rusted on and I heard using a hammer will destroy it. What is the...
I have coolant leaking from behind the water pump housing. There is a 1/8" - 1/16" space/gap between the water pump housing and block/oil cooler....
There is a 1/8" - 1/16" space/gap between the water pump housing and block/oil cooler. It seems like it should be flush? [ATTACH] There is a...
Thanks for the info Ben, I was afraid someone was going to tell me that dampener needs to come off. When you say "cooling package" is that...
Hi I have a coolant leak between the block and the water pump housing. Not the water pump but the water pump housing. There are 2 bolts 1/4 inch...
User Country has indicated there is an expansion valve near the evaporator. The freon level is fine so I'm going to replace the drier and the...
There is 1.5lbs of freon in the system with no leaks. It held a vacuum steady for over 30 minutes after the pump was turned off. Prior to...
Hi I'm completely stumped with my tripac. I just replaced my compressor after it went bad. Vacuumed the system. did not replace air dryer as it...
Hi I have a 2008 tripac with the wide multi-groove belt. Can anyone tell me if this can easily be replace with the bottom cover off? Is the belt...
I have an '08 780 with a d13 that I bought in December of 2012 with just over 500k miles. In the past week (now at 535k miles) or so it's started...
I usually come up 95N. i278 to i495 to i678.
Yeah most of the time I'm going to CT and thats the route I have been using. I guess I'm going to need to add the extra miles via 287 and the toll...
