vibration could always come from U-joints but would feel it in all of the high range, not just a few gears
I use NAPA. They are make for them with a different lable by DEKA
bearing and race set is like 60 X 2 sets so like 120 for parts for one wheel.
A little loose is never good, cold or not. pull the axles and if the oil isn't metallic looking you should be ok snugging them up. However if...
Thanks. I'll look into it and see if I can use C-15 vs C-12 programming.
we have two in dump trucks pair up with allison trans and they have really nice power. Both drivers love them.
the clutch brake can rattle a little bit when the clutch pedal is up. If it is a on piece design from Eaton and it is rattling you might have...
I really appreciate it...I'll do the leg work if you want to give me a name or number to call.
I need some information for a glider kit that i am building. I am looking for someone that has a C-12 with a Generation 4 allison that can hook...
If you have the means put two jack stands under the frame rails and let the suspension hang, this allows everything to hang even. Leave the bolts...
somthing like that...too many drop/lift axles only need one.
If you can find INVERTECH you will not be disappointed. I won't run anything else. adds lubricity and disperses water like no other.
Set up a website and put a sign up at a truck stop. you gotta put the man hours in sitting around and ground pounding... you are essentially your...
wish i could just go back to 03 and load up on C-12's
pull a valve cover and make sure there is no muck in there. If there is no gray sludge you are probably ok. I have two 3406's that produce a...
I have been poking around the internet and various sites trying to find out which engine "at present time" is the one that i should go with in a...
typically you will have oil in your water if it is the oil cooler due to higher oil psi than water psi. My first look would be at the water pump...
Heavyd is right but if you aren't sure post a pic.
