First of all, Thank You to everyone for the advice. I will be going with a 4' threshold at the door and then the 1 3/8" hardwood floor. They have...
Possibly ordering new truck and dry freight box. Cant decide if I should have the hardwood floor or steel. I haul a lot of engines, radiators,...
Thank you so much for all the help. I will be checking everything this weekend. I know I definitely wasn't getting 12 volts to the actuator so now...
Also, if I find one online does it have to be the EXACT same part number or is it compatible as long as they both have A/C ? Is there a "learn"...
So I think I have determined the problem to be the control panel.[ATTACH] I am only getting .22vdc to the mode door actuator motor. New from the...
OK Thanks, picture helps a lot!
OK, hopefully I will have a chance to look at it on Saturday. Not sure how to even get that cover off the heater core but hopefully can figure it...
[ATTACH]Air only comes out the defrost, cannot get air to come out of the vents or floor, no matter what I select on the controls. Sometimes, when...
Exactly! Way easier :) I put one of the old ones in the vice at home and hit it with a grinder and cut-off wheel. Took about 90 seconds to cut...
Yes we do, lol.
Showed up at the shop and truck was done. They looked all over town and could only find the long ones but they got me going so I'm OK with it....
Would that be because of the temper of the steel and the heat caused by grinding them off?
Took truck in today to get 2 new steer tires. Passenger side wheel studs and nuts were chewed up from previous owner hitting something. Tire...
LOL, Thanks.
Yes thank you. Every morning for the last 25 years I always check my oil and antifreeze before starting any equipment I have run. I have been...
OK thank you. I'm told by a mechanic at the shop that it's 4 or 5 hours to get the egr cooler off to test so I am not sure what to do. $500 to...
Yes it does. I have just been assuming THIS was the EGR cooler. I am not familiar with these engines at all, I drove a Mack Granite for the last...
Been lurking here a while so thought I better introduce myself. I live on Vancouver Island in British Columbia. I will be 45 in January and got...
OK, so if it was a head gasket, cracked cylinder head, or oil cooler leak I would see glycol in oil sample? Or maybe oil in coolant tank? Not a...
Thanks for the replies everyone. I am buying the sample kit from my local international shop but the results come back from Finning labs. I am...
