I have to agree with most people here, coolant temp sensor and not the CLS. Try the sensor first, it is the least expensive option and the look...
Series 60 is probably the way to go, parts are easily available and most everyone knows how to work on them. I have worked on the DD15, good...
Kenworth T2000 with a CAT 3406E, cranks over but will not start. If you add starting fluid it will burn up the fluid but will not maintain idle....
Sounds like it could it be left over oil in the cooling system or a leak. Ask yourself, how much oil? Is the oil level low? Are you loosing oil?...
My personal experience, I had a customer with a similar situation. Truck is paid for but the engine did not burn correctly for a retrofit DPF. So...
I agree with freightlinerman, check the harness. The ECM harness, the battery supply cables and battery ground to chassis.
Found the problem, it was the compressor. Installed the Detroit Diesel air compressor, fired up the engine and psi was able to build right away....
You need a tech that has DDDL7 software, have them look at the switches (clutch, Jake etc..) Once you press the clutch down you will see the light...
Easy fix, the dealer or anyone with the correct software can contact Cummins and purchase a ZAP IT password. It may cost you $100-200 plus what...
I would ask the same question, does it crank but won't start? Does it not respond at all? Need more information, Have a tech look at the clutch...
The primary discharge line is fairly new (about 4-6 months) but I will check it anyway. I will also look at the small line from the tank to the...
The ECM parameter needs to be changed, easy to do.
I have a Freightliner Cascadia with a Detroit Series 60 14L with about 750K miles, air compressor was replaced about 2 years ago and the air dryer...
eaton 10 speed manual
I have a 2007 volvo engine with the D13 EGR non DPF, the Jake Brakes work just fine when used for short/small periods. However when used for an...
I have a customer with a 2009 Cascadia with the Detroit Series 60 14L engine with the OEM DPF system. Cruiser control and Jake Brakes do NOT work,...
I would lean towards the EGR cooler, they tend to leak into the exhaust side and over to the intake (Exhaust Gas Recirculation). Remove the...
Let me give that a try, will post my finding later.
Thats right, I will try that
sounds good James, let me try that. Where is the check valve located?
