Wonder if anyone knows anything about these TMC robotic Auto haul trailers from the 80's? Have seen a few around over the years, are they worth a...
Hello, looking at doing a trip from Saskatchewan to Florida to pick up my own trailer, no cargo, truck is company owned(my company) but has a...
Thanks for the input guys, finally heard back from the permit office, no dot number required, but I do need trip permits and IFTA for each state.
Hello, i'm an owner operator from Saskatchewan, Canada and i'm looking at buying a trailer in Illinois for my own use, I'm not IRP registered as I...
Found the parts, about to put them in, going to have to relocate the fuel splitter as it’s mounted to the crossmember right now, Luwi67 where is...
Yes it ended up being 1 bad injector, Cummins dealer couldn’t figure it out with the scan tool, tried changing all the pass through conectors,...
I tried the 5 and 6, had another tach laying around that was set to that, just jumped it right to 3k, I have cat et but my cat com adapter is screwed.
ok... might not be they same, mine gets signal from ecm, not from the flywheel
Does anyone have the switch settings for a tach in a 01 379 with a cat 3406e? Seems to be reading a couple hundred rpm high at cruising speed,...
Ok, thanks for the info anyway
I think the holes in the channel are actually worn/stretched out, from what I can see anyway. It has the remote lube and I can see the grease line...
Hello looking for a schematic and information on the undercab clutch linkage pivot point on my 379, seems the aluminum channel the pivot point...
Right on, going to find the parts and get this done over christmas, did you get your cab adjusted yet?
check the clutch linkage pivots under the cab above the air tank, mine are pooched, going to have to drop the battery box someday and somehow re...
Awesome been searching for these part# for a week. Pretty easy install? Do you have any pictures?
Pulled the shackle sides off, the gap is from the washers wearing into the alluminum, bushings are shot but I flipped the sides over so at least...
Michelin xze2 on the front, Hercules h302's on the back, all the rims and tires have around 50,000 miles on the, I used the truck for local,...
[ATTACH] [ATTACH] [ATTACH] Torque bushings and front shackles, shackles have a bit of a gap, greased last weekend, 3000 miles this week
Hard to see in the pics but the rears are worn around 3/32 more on the pass side[ATTACH][ATTACH][ATTACH]
[ATTACH] [ATTACH] [ATTACH]
