Did it make an expensive boom/bang when it let go? One that makes you go.... that was not good....
due to the difference is sizes between the piston side and the rod side of the cylinder, you can get a pressure multiplication effect on the rod...
you will also need to swap polarity when going from shielded wired, to using shielding gas.
Would splitting up the rear air bags by adding an additional air ride control valve so you have a left side and right side valve help?
The steer axle is 12,000-18,000 depending on tires, 32,000 for the drives, 18,000 for the 9' spread lift axle, 13,000 for each axle in the group...
make sure whatever trailer you rent can support a 9,000 lb forklift, that is a lot of weight concentrated in a small footprint. I would call a...
a local lumber supply company has around a 24' flatbed with a moffit hanging off the back that can also accept a van body for those items that...
2 fullsize crew cab pickups will weight 6,500-8,000 lbs. each, or more, which will put you over your trailers 15,500 GVWR and put you into CDL...
in the RV world they upgrade from electric drum to hydraulic disc using one of the many kits available. Below i linked a kit from Kodiak, but...
That is a lot of engine for a single axle with no real weight over the drives unloaded. I bet it flattens out hills and gets fun in the rain.
the multi axle trailers in Michigan have lift axles, from 2-5, depending on who specd' it out. Even with the lift axles up, you have to be...
years ago I remember seeing an enclosed, stinger steer auto hauler that had the fifth wheel right behind the drives, with at least 5 ft of deck...
did you also replace the front axle shoes, drums etc. or only the rear? I wonder if something on the front axle is causing the front brakes to...
it may have been from a floating dredge, my step dad camped close to that area and mentioned there use to be huge floating dedges during and after...
i know its up in Canada but did you see this used C-Dolly?...
in Michigan you are allowed 18k on an axle but it has to be 9ft from any other axle, this is without a permit. You are allowed a max of 164k on 11...
I did some searching and there are some options available, i never installed a OBD lock on my 06 Cummins due to my warranty being voided after i...
i have heard of people locking the data port on their truck just so this does not happen. some trucks out there will not run on a stock program...
My understanding was that a smarty gets vin locked to the truck when the stock program is stored into the smarty and a new smarty program is...
If you are going to be hauling in Michigan you may want to rethink a Triaxle, i see very few triaxles, the few i have seen are pulling a 7 axle...
