Well, I would run it and heat and see if the code comes up. I am not extremly well versed in Carrie's but I suspect you have a unloader that is...
This should really be a sticky of some sort. I understand that this sub forum does not get alot of traffic, but we should really have this be...
False. RR is simply telling you it is a rail unit. No big differences that you will notice.
I would upgrade for various reason but the number 1 is download capabilities. This is a cover your ### industry, and unless you can prove through...
The vector has serious issues. What are your needs for product?
Ah my favorite question. I am slightly biased but have worked on both companies products. Without getting to a big debate, TK will be my pick for...
Let me give you some advice since I work at a dealer and have the position of service manager. The following is the biggest reasons why things...
Kazoos is what the rubber bits are. Yes you need them, with holes wide open your unit will have a bad time in humid environments.
On this unit it is not uncommon for the shunt on the board to go bad. If your battery was bad that would not affect the units code 25, these units...
Not at all, just a rule of thumb 1 hour of engine operation = 50 miles for a car. Sooooooo that is like 500k. That being said it is not uncommon...
I will get you part numbers. For quicker response quote my response.
We install mesh chutes typically we use a bracket that is tek screwed to the unit, snap two chalk lines down the trailer, and we use 1/4 inch...
No, belts...fan pulley, spacer, crank pulley, and then the seal, no you do not.
My advice is to get a sb210 with a tier 1 Yanmar.
Hello, I have worked on one or two Yanmar engines these front seals are known to leak right around that hour mark. Just a bit of advise would be...
Well hope you got it squared away, but if it is a tier 2 yanmar a blown head gasket is common.
A couple of things to add here, depending on the unit a chute for produce is advisable. Now with most sr2 and up equiped units, the modulation...
The tk unit... I know it is a precedent just wondering what sub model..
Well this is depressing, I was a tech for Hogan for 4 years. It was a awesome company to work for and I talk to the owners son weekly. If there...
Hello, I will be mainly posting in the refrigeration sub section, but I joined this forum in a effort to answer some unknown questions that may...
