Does anyone here know of fair DOT examinations in the Vegas area, would prefer a mobil service but not 100% required.. Just want a fair service...
Was doing a team charter (Empty Leg luckily), maybe was pushing it a little bit much upon reflection, however it was my turn, the pilot truck stop...
Still could be many variables.. Easy to eliminate the SRS/TRS, just have a DDR/DDDL plugged in and crank it.. that will tell you.. If they're...
Most likely the SRS sensor.. Its the first sensor the system checks, TRS is the next one..
If you can, get them to pull active and inactive codes.. The Internet trouble shoots are a fraction of the price of a dealer :) How did it break...
If there's any cummins shops near you, might be worth calling and see if they will pull the codes for free ?
* - Windows 8.X Starter or Windows 8.X RT is not supported (from the cummins site)
paste in the exact error it gives you, i'll look in it and try and replicate the issue.. Like i said, works on my windows 8, then a have a...
^^ I Agree ^^^ However did see a broken ECM recently.. No Start, would crank like it wanted to start then go back to just cranking, no error codes...
INSITE™ 8.1.0 Software Download (Windows 7, Windows 8.X) I see this on the download page. Your windows 8 PC, its not an older Microsoft...
very true.. min voltage is 9.x volts to the ECM if you're cranking and it drops under that then the ECM will not even power up.
yes, that one.. sorry i'm use to seeing these engines at a different angle, so your back is my left (buses)
I'd remove the fuel return checkvalve, inspect and check function of it. If the problem is progressively getting worse somethings wearing out.. fast!
Most likely the fuel return check valve. Its below the intake line. Do you have anyway to check the fuel system pressure, the check valve...
Also just double check the battery terminals also.. usually that logs a hard code (again seen this but would have to shut down, disconnect batts,...
The Pedal will have the Williams logo and wording in the middle. You have the J1708 box as well correct ? (The cummins version is Inline 6) but...
I would just see the CEL when accerlating (the strange part was it appeared to happen when i was going up a grade or controlling down a grade)....
No I understood... All cool..
I must be blind as i dont see a RV Transport Section :)
Insite works happily on my 8.1 Windows (MS Surface) What version of insite do you have?
