Or they’re making it look they care about drivers. Drove as a lease driver for one of those mega companies. Trucks were stuffed with unnecessary...
1. Go out the truck and lower the landing gear. 2. Disconnect air and electric lines. 3. Go in truck and pull that sucker in photo just to release...
Yes, it is working. Repaired and secured the bad compressor wire. Like I said, I didn’t have refrigerant leak/lack/overfill problem (I really hope...
I compared the PSI reading to my friends truck at static. Both trucks were parked overnight with engine off. I bought one of those Arctic Freeze...
I found high pressure sensor. When disconnected (unplugged the elec current), fan started spinning fast which I guess meant it was working fine. I...
As I understand it correctly, both Low and High pressure ports should be equal psi, ac disabled. There is certain correlation between outside...
Thanks Everyone, Spent whole day yesterday trying to figure out under blazing heat. Turns out power line to compressor was corroded from rubbing...
Hello, good folks, Have no power going to AC compressor. Checked compressor clutch - turns freely (when off). Check resistance on compressor...
It was exhausting air from that port. I changed the leveling valve and airdryer is still purging like before (every 45 seconds like a clockwork)....
I detached the arm off, the bottom bolt. Thats why it looks twisted.
second picture is general overview of the part. First picture with hole is right underneath the valve. It has teeth to screw in something yet it...
When I’m unhooked from trailer, No. It is leaking only when driving. Especially after uphill going downhill. Like I mentioned above, after...
Several times tried to catch the leak unsuccessfully. So, I have previous posts about my truck having problem with my air dryer. When going uphill...
I’m the one asking here lol Does it release air when bags are under pressure?
Mine is working abnormally. When hooked to trailer and pressure on air bags rises it opens up and leaks. What is it called?
I’m looking into that theory about airbags. Mine fails only when i’m hooked to the trailer and I went to mechanics bobtailing.
What if I install “regular Volvo” governor on that line? Do you think it might work?
I will ask mechanic on Monday when they open. I doubt there is a port for governor. I talked to him yesterday to see if I could switch to bendix...
That’s after I told them the air dryer is new (i drove 6K).
For sure!
