On my 98 9400i, the rod goes from the clutch pedal under the dash, and thru a fiberglass panel just above the throttle and out to the linkage....
I've had it happen to me four times in 34 years on the road. Two on the right side and two on the left side. Twice I was loaded and twice empty....
AModelCat, I think that's a good suggestion. I've looked at those bolts that hold the entire assembly on. I don't know if I can get to all four of...
Check your motor mounts, front and rear. My '98 9400 IH with an N14 cummins hops and carries on when I take off loaded on a hill goin forward, but...
Thanks for the replies. The motor mount is already broken so I'm not concerned about damaging it, but you're right I don't want too hurt anything...
I'm replacing the rear motor mounts on my 1998 IH 9400 with an N14 cummins. They each have one bolt running thru the middle that takes a 1 5/16...
I'm fairly new to this site and just saw your posts today. My truck, a '98 IH 9400 with an N14 does the very same thing. I don't have a hydraulic...
Just an update on this. I finally got the problem fixed by replacing injectors. I had bought two Cummins recons. Was gonna use one for a spare on...
Thanks for the responses. Thought about the camshaft myself. Trying to pretend it ain't that. Checked the ECM plate. Took it off and blew air thru...
Thanks Heavyd. Looks like that is gonna be my next step.took a short run with it on Thurs and Friday. Seems like the idle is getting a little...
Thanks for your replys. Yes my temperature did increase enough that it is on par with the others. However still have the same problem. Found a...
OK thank you. I will check them out. Better safe than sorry.
HA! Thought it might be the plug wires!
I will. Thank you
I've got a cummins N14 with 1.3 million miles on it. It,s in an IH 9400. 1998 model. When I'm going up thru the gears, there's a slight miss each...
Well I fixed this a couple weeks ago and am just getting around to update in case someone has a similar problem sometime. Pulled code 323 from...
Thanks for your thoughts on this. I have found a bad injector by using that very method in the past. I will check the injector wires and see what...
I've had this truck for a year with virtually no problems. Runs great and dependable. Lost power intermittantly the other day while on the...
