Would you mind giving me a call to discuss this? My number is 785-204-2398.
Update- I have done more work/investigating. The movement of the transmission I feel in the shifter does not happen if I drop the drive line after...
Getting ready to wash it all out. I know there are a few bugs in there, and dust too. Also ordered the seals for the sides of the radiator to help...
I'm running a red premix I get from my KW dealer. The service manager mentioned this to me, but when he found out I was already running his red...
I noticed this when I put my thermostats in a pot of water on the stove. Start to open at 178-180, and not full open till 190+.
I see. Thanks for the info!
I need all the fuel I can get!! Cac is new, no leaks. Pushing 41-43 lbs boost depending on ambient temps. Egts run 800-850 normally, unless on...
Fan is working fine. Guess I figure when Cummins says 180-200 operating temp that maybe I shouldn't be trying to see how far above that I can...
Fan is installed right. It kicks on right at 200, and works well. Since it has warmed up this summer I have gone to turning fan on manual, and...
I would get to 210-220 on hot days. Kinda hard to exactly nail down where it was, as I have since installed a digital temp gauge, and I just had...
Hello. I have a T800 with an N14 Cummins, and am needing a better radiator. I changed my OEM 3 row last winter due to it having significant...
I'm sure when I replaced my carrier bearing I put it back just like I found it. That's not saying a whole lot tho, and by that I mean this. I am...
I had a local shade tree (but very very knowledgeable) mechanic do my axle bearings, as it was soon after I bought the truck and I wasn't...
I have considered opening up my front rear, but have never been into a rear end before. Is there timing or anything else I have to know about, or...
Carrier bearing was changed couple years ago, no change. No caps spinning on u-joints. All are new, all get grease to all four corners. As for...
We put on a new harmonic balancer at time of the inframe. I have thot about a bent axle. But repair shops around me say axle shafts never bend,...
Will try that, hadn't thot of that option.
Ride height is set to spec given to me by my local KW dealer. Cannot be a tire issue. Didn't change when I switched to duals. And actually just...
Hello all. I have a 2003 T800 daycab that is giving me fits. A little history, truck specs, and what i have tried-bought truck used in 2016 with...
Did all of that already. I cannot make it get very high egt's with the amount of boost I have, even on a hot day lugging it I won't get above 800....
