So I checked trailer and the last valve so I thought is the tractor protection valve , which is working as it should . I turned my attention to...
I had a 5ek that wouldn't start , come to find out it was the cam sensor that was located on the side of the cam gear , it was removed and the...
I would go with expansion valve , clean lines (flush)
First off , Sorry for your loss . I cannot even begin to imagine . Second move on karma has a way to getting back to them . I wouldn't waste any...
I believe the blocks are the same , call cat with both block casting numbers and they should be able to let you know for sure. Castings numbers...
Check all battery connections first , second check the fuse box at the fire wall by steering shaft. Check that the hot wire is tight.
Yes this can be true, but keeping a good maintenance plan and make repairs as soon as you find things is key and you will have less Down Time as a...
Personal preference, I like Peterbilt myself but have owned both
I don't believe the head is the cause . C13 cam is lower mid engine . You are probably due for cam bearings and rod and main bearings. You might...
Neither of the Two that you mentioned . I would go Peterbilt or kenworth , because they just hold there value . Second manual transmission, when...
I replaced all lights with Leds , but what I had to do was leave 2 of them (regular lights), which were the turn signals on the pods on the 379...
Warranty, Warranty ,Warranty Just so you know Peterbilt interior and exterior warranty expires about 20,000 miles i do believe, at least that's...
I would have asked which rod and main bearings they actually checked?
I would place the 4 new on the rear rear axle and the 4 worn on the front axle so to make the worn tires last longer. I.e . The rear rear being...
Something to consider thats all , anytime we have upgraded this is what we came across.
You need to replace your expansion valve to correct this problem in the sleeper
I believe there is a fuse panel in the passenger side compartment under sleeper , check that first , then check current to blower motor and check...
Thanks for helping, the tractor (yellow) is exhausting fine from yellow exhaust hose . So I know it's not plugged and valve is new and is doing...
I will check into that first thing in the morning. Thank you
You need to get to the thermostat which is located at your evaporator . It is mounted to the side of the evaporator and has a probe going into it...