Hard to say. Turbo issue? When is the last time u checked the air filter. Only on acceleration??
Regening will be dependant on how stop and go you are.it is normal to Regen quite frequently when your just doing city stuff as the exhaust temps...
Yes you need to reset the ash count!
Instructions above do it yourself save your moola
Inlet nox rationality error. Check EGR for exhaust leaks. If no leaks most likely the inlet nox sensor is bad....need a computer to reset the...
Also the compressor is always mounted to the back the gear train is at the back of the engine..
You only need to do the fuel pump if the fuel pump is leaking at the o ring. No need to touch the fuel pump if you only need the compressor...
Are u sure that's the right code??
Prevent dirt build up that could cause the valve to open and let air out..???
Ships quote out 8 hours to 6 hours btw
Step one drain coolant from rad and block. Step 2 remove power steering pump off the back of the compressor. You will need a new gasket! Step 3...
I agree with you but a squaking noise when applying a brake application sounds different then an air leak on a brake application. Use soapy water...
Honestly this sounds pretty normal. If your unsure about brake application pressure to the trailer and are concerned with the tractor doing most...
What's the code
Just saw the video and I'm 95 percent sure you have an intake valve stuck open. Remove the inspection plate on the bottom of the bell housing and...
Check all your valves for adjustment not just Jake's.
What I would do is this considering just the tail lights on the trailer was the first issue .... test each pin on the trailer cord using the cords...
Also injector o rings go bad might check that to!
No computer work for the doser. And also you don't usually need to replace unless a code is active. Dpf filters need computer work to reset ash...
3 bolts is used to change the scr doser if you use a 1/4 6 point socket it will work to remove they are reverse torx bolts.. also when changing...
