Got it out!! Soaking it over night and a BIG hammer. The shifter has a rubber sleeve inserted in bottom that got toasted by torch and will need...
I had it in the vise last night before posting this thread. The beating this bolt is taking…
Lol. Ok. I’ve got it in the vice and turned it cherry red but it’s not going to budge. I didn’t check for joint play prior to heating it so I’m...
I can’t remove the bolt connecting the shifter to the tower in my 386 Pete. Is there a trick? It won’t budge!!
I swapped the turbo bowl for a smaller one and that brought down the egt to 900 in a hard pull. I also bot cat et and started messing with files....
Rochester Diesel in Rochester MN. The have all the high tech machines. It’s all they do.
Handy Freight here. I need that phone number to have my cat ecm set up with a hot tune.
I need info on what file to install on my engine. I have marine cam 58 injector and stage 2 turbo with full tilt manifold. Current ecm is stock...
So how did it all come together for u? I rebuilt my 6nz 550 in March and installed marine cam and 58 injector. Full tilt manifold and stage 2...
I recently rebuilt my 6nz and decided to try the marine cam from highway heavy parts I was already using the c16 injector. I also tried the...
Thanks for asking. It helps others to share the solution of a problem I worked around the problem. I was stressing a bit with the no start...
The pump has two different size lines also so hard to mess that up. I can’t get any traction with the hand pump. Just tried a different hand...
I have a 2000 kw 900 with a c-15 cat. I removed all my fuel lines and installed a new transfer pump. Now I can’t get fuel to flow. Truck was...
My 6nz00636 was manufactured 12/99. I think the 5th didgit should be a zero.