Thank you Naz i did not want to reply b4 i fixed my issue.Update,mine was clogged EGR cooler.O cleaned it seems all good for now.If it acts up...
Naz,i know this post is old.Do you remember what was causing this ?I have the same issue,replaced Delta P, replaced egr temp sensor,Replaced...
D13 ,08 13spd
I might have leak at the turbo gasket .30 psi i hear noise whining
I need advice please!!!Warm weather almost full boost,cooler weather boost pressure around 30psi any suggestions what could be the issue?
I spray painted to see if i have black smoke around it visually i cant see it unless its on the back side.Another thing it might be my turbo...
Yes i get whistle sound for sure thanks Nas i will visit you for sure once im around Chicago area thanks alot!!!
Nas,what about this.on cold start little white smoke comes out from pipes After the egr opens the smoke goes away but i smell smoke odor when the...
No nothing like that
Thanks Nasriza!The pressure was dropping pretty quick and i dont see any leaks.whats so ever.What are your thoughts.
On cold start when the engine is loader that means the egr is closed right?
Need advise.i tested for boost leak with air pressure . The guage on the air pressure tester drops but no leaks on clams towards the air charger...
Yes,some how in the housing i had two O rings,I know while back it was replaced in a shop in Chicago area,the mechanic left it in their so i...
Question?I start the truck after few minutes the truck starts to shudder rpm goes up and down the truck starts shaking.Increase the Rpm with the...
[ATTACH]
Did any one had this code please help mid 128 pid 103 fmi 9 turbo speed sensor but is it ok for the turbo speed sensor to be covered in engine oil...
Not on the intake .Intake is good im talking about the turbo speed sensor located on the turbo its self
I have a problem code mid 128 pid 103 fmi 9 turbo speed sensor issue .I replaced the sensor same issue but i noticed ,the sensor is soaked in oil...
