I think I'll remove the steering setup and replace the idler arm pictured above with a powered steer box. The passenger side will stay a steering...
[ATTACH] Not a broken leaf. Notice the second leaf from the clean side. Same on the other side but it looks broken because of the oil/dirt.
I think I understand the basics of the steering cylinders function. Logically, if any air is trapped in the systems lines or cylinders it might...
What's a triple 7?
[ATTACH] [ATTACH] [ATTACH]
I'll start by repacking the steering cylinders. They seep anyway. How can identify the cylinders I have? Does anyone make seal kits for them or...
I wonder if a steering stabilizer shock added to the system would eliminate the bounce. You said you replaced the air assist with power steering....
Can anyone tell me how this steering system works? The drag link between pitman and steering cylinder is my number one suspect. Where it...
The fronts are kumo tubeless floats... [ATTACH] Rears are tubed radials... no widow makers though. [ATTACH]
Haven't pulled the dash yet but no sign of fuses anywhere. No kickpanels...there is an air vent instead. Junction box at floor by drivers seat....
As far as I can tell there is no fan clutch or coolant thermostat. The thermostat operates air shutters on the grill and the fan spins...
Spring bushings is a possibility... [ATTACH] [ATTACH]
There is 1 steering box and two steering cylinders, if that's what they're called. One on each side. Hydraulic steering assist I guess....
[ATTACH] Power unit serial: 94B7075
No brakes on pusher axle. Wedge brakes in front. Scam brakes on tandem. Crane is from a military HEMTT. Dump body is from a grain truck.
There is slack in the steering that makes highway speeds (55) tiring. The steer box seems good when turned by hand, no play noticed. The pitman...
I'm looking for information on an old truck. I was told it was built out of 3 trucks combined to make 1 in 2001. Supposedly it is a 1969...
