We put on a good used head with low miles on it. It smoked heavily and #2 cylinder was running cold. So we changed the injector in #2. Replaceing...
What would cause an exhaust valve to burn on a Cummins Big Cam III. Its a stock engine. When we first looked at it I thought something metal had...
I picked up another cam sensor and installed it. I will wait and see what happens. I may install a fuel pressure guage as well. Thanks for...
We had just changed the oil prior to the no start, so that was probably the cause of the code. I'm gonna order a cam sensor for it. I checked all...
Have a 2004 Cat C15, had a no start condition yesterday. Code 46 was stored in the diagnostics. Check the cam speed sensor wiring by unplugging...
This problem sounds similar to one I been trying to deal with on a C15. Now this happens very rarely, only 3x in the last year. Shut the engine...
I did ask my local Cat dealer about that. But they thought it was best not to have the extra connections to reduce the likely hood of a problem...
I haven't looked at the truck yet, but according to my notes pin 1 & 14 are blank. So I will take the 2 wires I left out, plug them in to sockets...
Got some coffee in the system now, and I remember why I folded the to wires back. The 2 wires I left out were unplugged from the J1922 Pins in...
Wow Thanks for all the responses. The Jake does work very well. I looked back at my notes/conversion wiring diagram and I have J1939 and the...
Pete [IMG] [IMG] Last winter I replaced my 3406E for a C-15 Cat engine in my 1999 Pete 359. Everything went pretty smooth, changing the wires for...
SMOKE! :biggrin_25525:SMOKE! :biggrin_25525:SMOKE!:biggrin_25525: She runs! I went back a reprimed the fuel system. Took the return fuel line off...
I put a pressure gauge on the check point at the filter. The fuel pressure ran up to 60 psi while cranking engine over...but still no smoke.
I added a 12v supply and ground and double check my pin locations. Everything is wired as Caterpillarwrench said. Still no smoke. The check...
The owner of the truck was concerned over his truck meeting the possible new emssion standards for Calif. I don't know much about that issue, the...
I swapped a C15 in place of a 3406e with cracked head, but no start, no smoke. I changed the 40 pin plug to 70 pin plug with the use of wiring...
