The splitter valve shifts when I supply it with shop air. But isn't getting air from the shift valve.
I have a 77 IH Transtar with a Rto-9513. It had the chrome shift knob with the split valve on the side. That one developed an air leak and was...
I'm sure I did, I barred the engine over and I can't see anyway to adjust it at the clutch. Guess I will leave it with free pedal.
There isnt a clutch brake that I'm aware of. The linkage does have a long threaded portion at the upper connection to the pedal. That's where I...
What is the proper way to adjust the clutch on a 95 4700 T444E with a 6plus spicer transmission? It had almost no free play, clutch was releasing...
No, I don't which one of the modules under the hood is the ECM?
I verified, there is an oil pressure line connecting the gauge to the HPOP reservoir, the gauge is mechanical and doesn't sweep when the key is...
I retrieved codes using the Engine Diagnostics button on the dash and got 111 for active codes. For Inactive I got 124,221,622,and 313. 313 is...
Today the Oil/Water light came on in my 95 4700. Oil pressure gauge was in between 35-40 psi at 2000 rpm where it usually sits, when warm at Idle...
Okay, I had to tap the slides in with a hammer, they went in pretty easy once they were at the right angle and lined up correctly. I can move the...
This is my first time with these, they have a strange mounting setup with a wedge and a spring. I thought I greased them up good, My uncle says...
I jacked up the front and rear of the truck and spun all the wheels and the fronts spin with almost no friction and they continue spinning when I...
My 4700 rear brakes were dragging, you could hear them squeaking when first starting the truck and driving. I replaced the calipers, pads, and had...
I had a leak from the brass fitting that threads into the front of the fuel bowl on my T444E. I tightened the fitting and cracked the female...
The switch and wiring is all there, just isn't mounted to anything. The park brake light works when I press the switch in. I just don't know where...
Hulld, thanks for the reply both calipers had seized pistons. I also threw a set of wheel seals and a pinion seal on while I was at it.
I would like to get my cruise working in my 95 4700 with Hydraulic Brakes. Nothing happens when pushing the cruise buttons or trying to get it to...
I've got a 95 4700 single axle with hydraulic brakes and the rear brakes are dragging. It's a flatbed truck and we are moving round bales about 6...
