i’ve got a ‘21 - and i think it’s bulb specific got a ‘21 and the bulb would not flash - but stayed on. In my case it was bulb specific- meaning...
Recommend you get a pyrometer gauge - and watch the temps on the turbo - cranking issue could be anything from weak compression, starter to a worn...
Basically you can get a cash severance from the company that let you go They have to report the incident - call up the State police and get your...
- it would be helpful to give a reply if one knew the location of accident- so we can all put it into perspective and give you advice
It’s the starter - you got a rebuilt and it’s just acting up Replace the starter with a new one or a gear reduction
They advertise on Facebook- 18percent of load - includes insurance- call them is the best way to figure out what’s going on
I guess I’m 5 years late to the party ol boy ! Knock yourself out with the rebuilds and the 80k mile oil changes! Your’e every mechanics wet...
Get real folks - I just did a cursory reply for settling a difference in opinion - There are CATS, ISX DD’s MX etc out there - each engine having...
Siinman - I already stated in a previous post about blackstone labs. You’d want to change it on a newer truck - if it’s iron casting - for piece...
53’ dry van 42k pounds plus I- 95corridor Cummins isx peterbilt 579 10spd 400hp
Flip flops! :p
7 plus mpg
Depends where you run - if you’re doing flat I95 - lower gearing like 2.7 will really help you out on economy If you do a lot of hills - you’ll...
It’s the cheapest 10 gallon insurance you can get - and for somebody paying $50k for a rebuild - I’d change it every 10k miles ! Use the no spill...
[ATTACH] No stealerships- try fleabay or facebook marketplace , Vander haags etc.
Where do I even start! But let’s start a new thread on oil changes, specs - have a discussion with some actual mechanics and oil experts - ‘cause...
You wanted a DOT dealer certified truck - not an auction house - now you’re complaining about miles - DD15 or Mercedes om472 engines are available...
Insite- bootleg version works till the 2013 and lower years. What exactly did you need it for? The bootleg has to have a date for the computer...
It’s pretty normal for the turbo to spool up when downshifting- you should really invest in a pyrometer gauge - that will give you real time info...
J1939 is the communication protocol- are you using insite? How you’re getting those codes?