the head does have to come off and i wont know until i get it off and check the lifters and cam because i dont know why the rocker arms came loose...
the bridges were still there the but one of them was laying out by the rocker arm and was not touching the valve at all . the front rocker arm...
well it didnt take me long to find what had happen to the engine pulled the valve cover and the number one cylinder valve rocker arms have slipped...
well i got the truck to run and now the engine is locked up i did this all in one day .i shot a couple shots of ether to get it to start back up...
i got the truck to fire off today i undid the air filter intake and removed the egr crossover pipe its smoking pretty good and has a loud tapping...
here are pics of the filter housing on my 2009 dt466 i dont see a allen head screw i do see the filter regulator with the spring also there is a...
i looked today and watched the rpm gauge and oil pressure gauge didnt not move at all when i was turning it over stopped for a few seconds and...
ok thanks sorry i didnt see the international forum until i posted here
when cranking the rpm gauge will move a little and the oil pressure will come up to about 40 when cranking it was scanned and found no codes was...
thanks for the info i have been looking everywhere to find any info i can about a fix. i did have the truck scanned and there was no codes found...
last 8 are AH176027
fuel, pressure when starting is 0 psi after cranking for a few seconds it slowly goes up to around 50 psi and it will barley start and just barley...
i got a 2009 ih 4400 with the maxxforce dt466 it turns over fine but will not start i checked the fuel filter it was clean but when i put fuel...
i have 2009 international 4400 with the dt466 it will not start it turns over fine checked fuel pressure it will read up to 50psi when pushing in...
