Greetings friends, Does anyone actually know why there is 3 different part numbers for celect n14 ecms? Not a plus, old school Celect. 3619037...
Exactly my thinking. There is no listing for any code against the correct esn or cpl. Has me stumped.
Greetings everyone. Here is an interesting conundrum. I have 2 Cpl Isl8.9 cummins engines. One is 3522 one is 3512. Both seem to be exactly the...
Greetings everyone. I am about to install the gear on my cam. I have a 3021596 key. The correct key for BY .070 Timing. I cannot remember...
Hmmm, That’s a shame. Seemed too easy. I did know about the big ends. Im assuming the wrist pin, is a little end? (That’s what Aussies say) so...
Ohh right. now that’s a major bummer. Thankyou for clearing that up.
Are the valves the only problem? I found the 444 pistons have a deeper valve recess and the same comp ratio. will the crank physically not fit?...
My nt855 parts have the helical gears. I stripped out a complete non stc 444. So i have all of the associated parts. i am really just hoping...
I am aware of the helical vs straight gears. So if i use all the big cam parts, Then I shouldn’t have a problem there. Bc3 blocks are getting...
Greetings from Australia. I was searching the forum and found one year old thread. Figured id start my own. I am undertaking a full rebuild of a...
If you get really stuck. once you get the cab up. you can wire up a diagnostic ports pretty easily with the diagrams at the start of the forum....
Ecm harness. the main one. these things fail. And in their wake kill injectors and ecms as they go.
Possibly the reference line to the brake relay, Could be blocked or kinked. Dont just throw the parts cannon at it. usually its fixable with...
Top end adjustment. The more often the better.
Jumping at the starter is only 1 wire. pretty straightforward job. will isolate any cranking circuit issues. or remove the starter and check it...
Head bolts and injector hold down bolts. Rocker shafts replace, If they look fretted even a bit.
Maybe have someone with access to Cummins insite, to check any fan settings, That might help you along.
