I have an SB 300 and have run it for awhile with the high speed disconnected. On mine, there was a rod with a slight bend in it that connected the...
Ok guys I appreciate the help but I feel REALLY stupid right now. It was just a fuse. lol I couldn't locate a fuse at first since the windows...
I have a 2006 Peterbilt 379 with the old style toggle switches on the dash. This was the year they switched over to the newer style rocker...
What ENR said. I bought a set of these about 9 years ago and they still work great. I run in the cold north in the winter and the south in the...
I use Metrofax and love it. $12.95/month for 1000 pages sent or received total. It pays for itself every month. The best part is being able to...
And I just happened to read an article awhile ago that they were forced into electronic logs due to a poor safety rating and exessive violations.
It happened to me after years of running a teflon 5th wheel plate. After I took it off the trailer was to rusty to make a good contact with the...
I had an issue with mine getting air-locked after I put on a new water pump I believe. After I got it back from Cat I noticed the valve coming...
I had this same problem on an MBN C15. Cat has bad exhaust sleeves that crumble apart and the chunks go through the turbo taking out pieces of the...
Just to rule out something, you're still bobtail right? The reason I ask is I had a short in my trailer one time that caused this issue. Other...
It could be an old mechanical motor, they have a very distinct smell. I kinda like the smell of them though. It could be a catalytic converter...
You would drain them at the end of your run when you stop for the night. Shut the truck off and open all the valves. Let them drain until no more...
This thread is frustrating. I can't wait to find out the answers!
I was told I couldn't buy just those two harnesses. They said the entire engine harness is one piece and has to be replaced as a single unit. I...
Ok that's what I was afraid of. I reconnected the one wire that broke through, but there are several that have worn through to the copper wire....
I'll second that. Don't waste your money on the Pete one. I was thinking of getting a liquid filled one like pullingtrucker mentioned.
I have a question regarding the engine wiring harness on my MXS motor. I had issues with my jakes not working right and found some hoses had...
So the valve that pops off in the air dryer was sticking? When you disconnected the line you shot wd-40 in towards the air dryer? I had an...
I have a question about the air system on my '06 MXS Acert engine. I have seen similar problems on other threads but could not find an answer....