Read an article yesterday about Volvo coming out next year with a production D13 running DME. No DPF, No EGR, No VGT, and No SCR at this time....
A lot of these sensors are located after the output seal so they are in the elements. They do swell and get stuck and you have to find some way to...
Are you using any coolant? You could have coolant getting into the fuel through the injector cups. That will cause the filters to plug up when...
I for one miss Mr Haney. He gave us volumes of information and mainly for free too. Wish I knew half of what he does about a Cat engine.
Get some Muthers and a small foam disc. Buff it out and you will be surprised at how much more light you get. And it's a whole lot cheaper than...
Frozen and some gauges have the needle way out of range too.
Has anyone ever sent in their instrument cluster to one of these repair places that you can find on the internet? It seems that you could save...
Just had a D12 do this last week. We found that air was getting into the cooling system. After putting clear hoses on the air compressor coolant...
Be careful and make a diagram of the air lines. All of them don't go in exactly the same place as they did with the old pass-thru.
What v6killer said is true. Mostly wiring issues at the injector. They are cheap fixes after you learn what the real problem is.
Oil Cooler, how long has it been since it was changed?
You want your 5th wheel height to be no more than 47". Measure from the top of your frame to the top of the 5th wheel, and I think that the lowest...
Crank or cam sensor? Possible bad connection for ECM power?
I don't know about a D13 yet, but on the 12's the oil pressure sensor is prone to failing. It will either show around 30lbs higher or very low oil...
They make 3" ones for the steers and 4" for the drives, if you buy the 4" ones you can use them in both places.
Do any of you have experience with these brakes? The good and the bad please.
Not a Cat Guru, but have experienced some water pump failures where the impeller will spin on the shaft. But when this happens you will not be...
Battery power to ECM or cam sensor.
Thanks to all of you and especially Mr Haney. I don't want to start any problems but I do trust Mr Haney and value his opinion. We did go with the...
Have a 6NZ at 400hp that is needing a new turbo. This engine has a little over 1,200,000 on it. When it is overhauled will probably bump it to a...