Cat motor? Mine came with 10"x51" mufflers from the factory and the pipes came up between the frame rails then curved out and up, braced to the...
"A man's truck, separates the truck drivers from the house wives" I wanna be this guy when I grow up...
Try all the companies Chinatown suggested, and while you are waiting go back and get you Haz-Mat endorsement, you will need it someday.
Did you read this yet? http://www.thetruckersreport.com/truckingindustryforum/threads/so-you-just-leased-a-truck-eh.222195/page-2 you might want...
You need to cut it to get it right. Also make sure whoever you chose is competent, not a job for the average mechanic, just my $0.02...
I own my truck and I get 100% of the detention and 100% of the pump fee.(I pull a tank, but same principle as tarp fee)
anyone thinking about it, there is a lot of good information in it.
Do the actuators first then the injectors as needed. Just my $0.02...
Start at the hand primer
Stop pre-selecting put the transmission, put the transmission in neutral then change your range. That should stop most of the grinding until you...
If you are going to work on it Cummins. If you are going to pay someone to work on it Detroit.
"Run away while you can" (NO haha)
When you were in school they were teaching you to pass the test. Now you are learning to drive the truck.
Me too, I've never had a problem with Raney's, 8 or 10 years, couple thousand $ at least. Just my $0.02.
http://rawze.com/forums/index.php spend a couple hours reading here then decide for yourself.
I am assuming that you are talking about the convex mirror. If that is what you are talking about there is 3 Phillips screws around the "ball" set...
@Haulin_regional Glad you got it resolved, several people here (myself included) have preached for years that just because it says Cat or Cummins...
Amiri King has his own You Tube channel he is hilarious check it out. https://www.youtube.com/results?search_query=amiri+king
Excellent idea, I have never owned or driven on but it seems to me like the "open" intake on the stock hood, would probably scavenge air out to...
My $ is on a bad ground/grounds/and or connections, long term could have done permanent damage to the electronics, but if the shop is thorough...