...and if the cheap shoes had enough friction to lock the brakes how exactly would more expensive shoes have helped?
Answered my own question. T3 has lower Boron and the addition of Moly compared to T - Triple Protection.
Not arguing with you, but if you move an engine any farther back in my truck you will have to move the firewall.
The most solidly built truck Ive ever been in was a Marmon. A Pete doesnt even come close. Glad you got it fixed. Correction: Hope the newest...
Anyone that uses Rotella T3 tell me if it has Moly in it? I think I got a drop of T3 instead of Triple Protection by mistake. Im seeing 15 ppm...
Even with conventional Mobil tends to reduce consumption. Not exactly sure why. It doesnt show up in the volatility test. When I had engines in...
Im betting its a T600.
Its just an Aero 378 with a setback axle. Fiberglass hood like a 378 instead of aluminum like a 379.
Dont follow the above advice. I had four tight valves on a Detroit after 200,000 miles. Once they get tight enough they will stop contacting the...
Any oil on the PGOS list for the longer drains is going to be fine. Warren (The Nebraska/Iowa company not Warren Unilube) the blender of WalMart...
My Detroit was doing it and I couldnt find it. I checked both the cooling system and for boost leaks. When I replaced my stock exhaust with the...
Did Shell change the Rotella T Triple Protection Formulation again? I had just gotten used to the reduced calcium with the addition of magnesium...
Ive never seen an 18" Setting. The following is all Ive ever seen. Shallow 30" (Common on pups to allow more clearance with forward set landing...
With Steers that can handle 22,000 lb, drives that can handle 88,000 lb, a tridem that can handle 110,000 lb and being 6-Wheel Drive with an...
My 13-Speed shifts fine. But its in a Columbia. I dont know that an International is set up the same. Also dont know if its external or internal....
I run 65 mph and get 7.5 mpg. Ive found its the speed that makes the most sense between time and fuel usage for me. That is 65 mph according to...
My 14.0L Detroit (2005 with EGR) is set at 515 bhp and 1650 lb-ft. I run around 68,000 Gross Average and 25% Deadhead pulling 53' Vans and have...
I dont think that number of miles would have done it. It took three 400 mile turns with straight water and detergent to get all the diesel fuel...
8000 miles seems a little silly on chassis lubes. The component manufacturers told me you are just wearing the seals out early with shorter than...
PM Mr Haney he will set you up. I think you have to have 8 posts before you can PM. Im sure you can find something to comment on. Im guessing he...
