You may want to get it to a cat dealer. Sounds like it is inframe time, if there are no visible leaks. Last thing you want is to loose a rod and...
I had this same problem on a 96 Pete 379. The problem ended up being a bad wire connection on the back of the fuse box. I do not remember which...
Went threw the same thing awhile back and ended up the fan hub needed a major kit put in it. Front seal was leaking air internaly and when it was...
I would deal with the other parties insurance company, and if not satisfied get yours involved.
Try going to JJKeller.com. They pretty much have everything companies need for training and office.
Also could be transmission cooler if your's is water cooled. Transmission oil in the radiator will have a reddish brown tint.
I have a 2000 6NZ just been inframed. Put a new manual temp guage in and it is reading 15 degrees hotter than the ECM is. Put a new sensor in for...
Fuel filters,Charge Air cooler,broken clamp or hole in boot on tubing going to air cooler,turbo going out. Really doubt it is a head gasket.
Change the air govenor on the compressor.
You do not need a waiver. I go to my eye doctor just before I get a physical and he fills out the section for vision. Those charts suck and are...
From the factory it blinks the top lights on the side of the trailer. I swithced the black wire and brown wire in the plug for the trailer. Works...
When you open the schmetic for what you want at the top is a place to click to enlarge the page. Just tried it and it works good. Wire 298 shows...
Try looking behind the center panel of the dash. From the factory there is a fuse block there and there should be a fuse for the breather lights.
The splitter valve or equalizer block whichever you want to call it, has 2 flappers inside it. Take one apart and you will see. If it hangs up...
I have never been able to replace just the clutch on a A/C compressor on a Peterbilt. Peterbilt always says it can not be done. There are other...
The white needle shows pressure for all accessories, the red is for brake system.
Disconnect return line on top of tank and see if fuel is returning to tank with the truck running. If so you should have a shut off valve on the...
25 is no active codes 16 is low water sensor. Could be an old code that was never cleared out. 46 is answered here.
Code 46 is showing ECM battery voltage low.
I have reread your post and I am under the understanding that you have not yet been able to start the truck at all,and when you try you cook...
