Roof support plate mock-up. Since the A/C unit was low profile (wider and longer) I had to add a tail piece to support the overhang....
Here is the inner structure mock-up and finished. [img]20200710_115826 by moonlightluwi, on Flickr [img]20200711_154147 by moonlightluwi, on Flickr
Sorry I'm late with the pictures, I'm having trouble finding them. Here is the box and generator. I will get more to show the venting and ducting....
97 with American Class interior mechanical 7 digit
I spent a grand for the box from American truck boxes. I had specific dimensions. Another $325 for the drawer slide from Fast farm.
I'll get some together in the coming week
Check that your axles are level before raising or lowering the oil level.
Battery voltage dropping to 7.8 while cranking sounds like a problem all it's own.
Yes sir, it was great talking to him. Thank you.
In 2020 I put a Coleman Mach8 15k btu roughneck ultra low profile rooftop on my 379. to power it I have a eu300is in a custom designed box with a...
Anyone have any input on this? I sure could use some. Not sure which direction to follow. Whether it be Cat reman. - Independent ecm repair. - Or...
Looking for an ecm repair shop wondering who's the best, who to avoid and who is honest and fair. Thank you.
The mechanic stopped by today with a laptop that had Diesel software i think, his laptop with ET was getting repaired. He couldn't get my ecm to...
Thanks, I have a guy coming some time this week. I don't even get a 55. The light doesn't come on at all when toggling for diagnostic
I turn the key on, check engine light illuminates then goes out. Truck cranks no start. It has fuel pressure, tach reads 2 to 3 hundred rpm while...
I wanted to go from 2 straps per tank to four because I had a strap break on two separate occasions. Peterbilt wanted over $4,000 for 8 stainless...
I use elc and a non additive cat filter. It's a convenient place to get coolant samples while the engine is running.
Sand up to 600 grit then run your cut and color steps. Plenty of guys getting great results without acid.
Ha!
Make sure the ride height is correct. You can install a simple manual dump valve between the leveling valve and air bags, or swap to a leveling...