05 Argosy has non stop beeping noise

any message on screen?

what did you do before problem appeared? any works in trash area? driving rought roads? where are you from? argosy is a rare truck here, usually wight ex-swift trucks converted to BDF container haulers

 

if you got argosy with dashboard like in Century Class = beep sound combined with message ore light.

I sugest stuck air pressure switch in swithc manyfold ore step lock ore cab lock switch.

 

rise cab and drop it back. sometimes helps

 

Make sure everything is stowed properly OR you will need a new windshield!

 

Right (Blue) Connector #2 Pin Assignments
Number Pin Assignment Wire
C3 Optional Gauge Type 2D (-) '
C4 Rearmost-Axle Oil Temperature Sensor (-) 43G
C5 Forward-Rear-Axle Oil Temperature Sensor (-) 42G
C7 Gauge Return (AU07) '
C8 Gauge Return (AU08) '
C9 Gauge Return (AU09) '
C10 Gauge Ground (AU06) GND
C11 Gauge Power (AU06) '
C12 Gauge Power (AU07) '
C13 Gauge Power (AU08) '
C14 Gauge Power (AU09) '
C15 Ignition 437A
C16 Chassis Ground GND1
D1 Air Bag 454L
D2 Optional Buzzer C Power '
D3 Optional Gauge Type 2D (+) '
D4 Rearmost-Axle Oil Temperature Sensor (+) 43
D5 Forward-Rear-Axle Oil Temperature Sensor (+) 42
D6 Transmission Fluid Temperature Gauge (-) 30G
D7 Transmission Fluid Temperature Gauge (+) 30
D8 Optional Gauge Type 2E (-) '
D9 Optional Gauge Type 2E (+) '
D10 Optional Gauge Type 2F (-) '
D11 Optional Gauge Type 2F (+) '
D12 Optional Gauge Type 2G (-) '
D13 Optional Gauge Type 2G (+) '
D14 Optional Buzzer D '
D15 Ignition Jumper (see LH-D15)* 437A
D16 Ground Jumper (see LH-D13)* GND


A1 Optional Indicator 7 '
A2 Optional Indicator 6 '
A3 Tractor ABS 376L
A4 J1708(+) #1 Jumper (see LH-A10)* 1708+1
A4 J1587+C
†
1587+C
A5 J1708(-) #1 Jumper (see LH-A10)* 1708+1
A5 J1587-C
†
1587-C
A6 Panel Lights 29A
A7 Buzzer Enable Jumper (see LH-B12) 437Z
A8 Starter Lockout 15D
A11 Battery 437
B1 Right Turn 38R
B2 Headlights (high beams) 20H
B3 Low Air Pressure 18
B4 Wheel Spin 376S
B5 Fuel Level (+) 47
B6 Fuel Level (-) 47G
B11 Battery Jumper (see LH-D14) 437

Left (Pink) Connector #1 Pin Assignments
Number Description Wire
A9 Washer Level 320A
A10 J1708(+) #1 Jumper (see RH-A4)
†
1708+1
A11 J1708 Databus (+) #2
†
1708+2
B1 Keypad Panel Lights 29A
B2 J1708 Databus (-) #2
†
1708-2
B3 J1587 Databus (-) 1587-C
B4 ACPU (-)
†
1587-P
B5 Wire 3 (keypad) 437D
B6 Wire 2 (keypad) 437C
B7 Wire 5 (keypad) 437F
B8 Wire 1 (keypad) 437B
B9 Wire 4 (keypad) 437E
B10 J1587 Databus (+) 1587+C
B11 ACPU (+)
†
1587+P
B12 Buzzer Enable 437Z

Use this list to find Buzzer actuation wire. It is easy using DVOM to find what buzzer pin is grounded.

As you can see there are optional Buzzer inputs, that actuate Buzzer w/o text warning and indicator light

 

Or in plain English...
Does it have a low voltage disconnect and warning on the rig? If so, it's normally behind the passenger side panel, right by the passenger seat. See if the noise is coming from there.

Martin

 

ouh, LVD switch unit is located in right side of cab, really)))) Instrumental cluster beeper is built in cluster

 

BTW, about beep sound. Many Argosy trucks were used by SWIFT and retired converted to 20' container haulers + European trailer and Swift used dataloger ore something like this hidden in sleeper. They remove it but datalink and CAN wires not. and when this wiring is short instrumental cluster beeeps