2000 Hino FE2620 Truck Dash/Clearance lights not working

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by darkzero749, Dec 28, 2019.

  1. darkzero749

    darkzero749 Bobtail Member

    1
    0
    Dec 28, 2019
    0
    hello I have an issue right now with my dash lights and clearance lights on the box.
    I checked all fuses on passenger side and they look fine... nothing was ever touched also.
    The dash lights went out and the clearance lights on top of the truck box.

    Please help.. cannont figure it out.. is it the rear wiring that ripped? could that cause the dash lights go out?

    How can i check the issue.. please help

    Picture 1: You see the left side of the wiring
    Picture 2: Is where the wiring is located (red line)
    Picture Fuse: There are pictures of the fuses here.
    Picture 3: is where the box lights arent working all around the truck
    Picture 4: where the wiring goes in from outside into cabin.
     
    Last edited: Dec 28, 2019
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Raffito

    Raffito Light Load Member

    84
    53
    Aug 25, 2019
    Ingram, TX
    0
    The wire that's ripped could have cause the fuse to blown also causing your dash light not to work if they are on the same circuit. Make sure to test all fuse with a test light to see if they are good. You also need to fix all those wire connection properly and use butt connectors.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.